At NT Autotech, we understand that car theft rates are on the rise and insurance prices can be costly. Our Ghost Immobiliser Installation can help protect your car from being stolen with keyless entry car theft. With our reliable relay box, you can rest assured that your car is safe and secure. Let us help you stay protected.
The Autowatch Ghost Immobilser is a vehicle theft prevention device which is discreetly installed inside the vehicle and provides effective protection.
It requires the driver to enter a sequence of buttons and pedals to act as a PIN code in order to start the engine, so that only the driver knows the code.
This is like chip and pin, but for your car! You can even set a code up to 20 buttons if you want extra security. This helps prevents car theft in Manchester & across the North West.
A Ghost Immobiliser is a can bus immobiliser that will either stop the vehicle starting or stall it if the gear is engaged and the unique PIN code hasn’t been entered.
The Ghost Immobiliser works by immobilising the vehicle through the can bus network present in all modern cars.
The owner will put a unique PIN code in using the vehicles factory buttons.
If the code is not entered then the vehicle is disabled even with the car key present.
Ghost Immobilisers are not Thatcham approved however they are TASSA Approved , this is a body that is starting to be recognised by the insurance underwriters due to hands free car theft and key cloning.
The Ghost 2 Immobiliser is the most widely used and is a newer version of the original.
There is a ghost pro that’s dual can this is used on certain makes and models that need a dual can install for better protection.
The ghost immobiliser is RRP £499 installed inclusive of vat.
We currently have deals available where you can get a free GPS vehicle tracker for extra security.
The Ghost Immobilser correctly fitted should not be detected or wiring of a installation cannot be followed , it could be anywhere in the car and covered with the genuine vehicles loom tape.
The tape used will differ depending make and model.
With a switch the wiring can be easily tracked and once the source of immobilisation is found it can be bypassed.
The Ghost Immobiliser should only be fitted by a TASSA Approved installer and has been verified and training passed by Autowatch the supplier.
You can check if the installer is Tassa approved on there database.
Tassa approved and an electrical biased background and verified by Autowatch.
This will depend on the vehicle and type of installation all cars are different and times do vary however a ball park figure would be between 1 to 2 hours.
If fitted by a correctly adhering to the specific manufactures process then yes the install should not affect the vehicles warranty.
Failures on ghost are rare if fitted correctly.
The most common reason for a ghost not responding is the failure of a vehicles button causing the owner to not be able to input there code.
Further failures could be caused by a flat battery and the incorrect Slave start procedure carried out causing an electrical spyke and damaging the unit.
Yes, however there is a override pin which should be explained by the installer and if a vehicle button fails there’s a procedure to reset the unit into learn pin mode.
For this to work correctly the unit should be registered with Autowatch and with certain security questions answered with the information provided in the registration Autowatch would be able to talk the customer through the process if the Original installer is not contactable.
We are based in Manchester & offer our ghost immobiliser installation services to customers across the North West.
The Ghost immobiliser is the perfect way to protect your vehicle without having to worry about radio frequencies or a key fob!
With this system, all you need to do to disarm it is enter your unique PIN code with the existing buttons on the steering wheel or dashboard. You can even personalise your PIN code by creating a new one up to 20 digits long! plus a secure emergency code is provided in the event of you forgetting the code and needing to reset it.
Our Ghost immobiliser is installed by one of our friendly and experienced technicians, right at your home or workplace. Once it’s connected to your vehicle’s Can-Bus system, the device prevents your engine from being started without entering the unique PIN code. Rest assured that your car is completely secure!
We are proud to offer the Ghost Immobilser, which is completely secure. Thanks to its design, it is impossible to bypass using any kind of theft method.
It’s super easy to access your vehicle as the owner – all you need to do is enter your PIN code into the buttons on the steering wheel or dashboard.
You can even change it to a secure number of your choice. Plus, the device comes with a Service/Valet Mode which ensures your security code will never be compromised, even during its MOT or while it’s being professionally cleaned.
Don’t worry about any LED indicators, noise, or frequency giving away the presence of the Ghost Immobilser! The Ghost Immobilser works silently, using the onboard CAN data network to keep your vehicle safe and secure from thieves, all day, every day.
Checkout our latest offers and promotions below.
Instantly Check below To See If Your Vehicle Is Compatible